Commercial Floor Cleaning Services in Rochester, NY
Rochester commercial buildings put floors through a lot.
The manufacturing sector left the city with an enormous stock of older industrial and flex-commercial buildings along Routes 390 and I-490. Those buildings have VCT floors installed decades ago. They need stripping and waxing on a regular schedule. Let them go too long, and the finish breaks down, the tile dulls, and the cleanup cost goes up.
Downtown and the East End have a different problem. Mixed-use and converted retail buildings tend to have tile-and-grout in common areas and kitchens that hold every coffee spill and tracked-in salt from a Rochester winter. Spring strip-downs on those floors are one of the most common requests we get.
RIT and the University of Rochester generate steady floor care work: dormitory common areas, campus building corridors, and lab-adjacent hallways, all seeing heavy foot traffic on hard floors.
We do all of it. VCT, tile and grout, marble, carpet, and polished concrete. One vendor, one point of contact, all four surface types.
Commercial Floor Cleaning Services We Provide
VCT Strip and Wax
VCT is the most common commercial floor in Rochester and the most neglected. Wax builds up, yellows, and traps grit. The fix is a full strip-and-wax cycle.
We strip the old finish down to bare tile using a commercial auto-scrubber and chemical stripper. The tile gets scrubbed, rinsed, and dried. Then we apply fresh wax in multiple coats, each coat buffed before the next goes on. The result is the mirror-finish VCT you see in well-maintained facilities.
After the full cycle, we can set up a maintenance program: regular spray buffing and top-coating to extend the life of the finish between full strip-and-wax cycles. Most clients run a full cycle 1-2 times per year depending on traffic volume.
Tile and Grout Cleaning
Grout is porous. It absorbs everything it contacts. Mopping pushes dirt into the grout lines. Standard cleaning does not extract it. The only thing that actually cleans grout is pressurized hot water with the right chemical applied first.
We use a truck-mounted or portable hot-water extraction unit on tile-and-grout jobs. The process opens the pores, breaks down embedded soil, and pulls it out. Grout lines go from dark gray back to their original color. The tile surface gets scrubbed clean in the same pass.
After cleaning, we apply a penetrating grout sealer. The sealer slows re-soiling and makes routine mopping effective again instead of just moving the dirt around.
Additional Floor Types We Service
Marble and stone
Marble and polished stone require a different approach than VCT or tile. Acidic cleaners damage the surface. Abrasive pads scratch it. We use pH-neutral stone cleaners and appropriate pads. For marble that has lost its shine, we re-hone and re-polish using diamond abrasive systems to restore the original finish without replacing the floor.
Carpet extraction
Commercial carpet holds soil, allergens, and bacteria that surface cleaning cannot reach. Hot-water extraction pulls the material out of the pile. We use truck-mounted extraction units for large commercial jobs. Standard recommendation is 2-4 extractions per year for high-traffic commercial carpet, more frequently in entryways and high-use corridors.
Polished concrete
Concrete floors in warehouses, showrooms, and modern commercial interiors need a different maintenance approach than coated floors. We use multi-step diamond grinding and densifying to restore or establish a polished finish. For maintained concrete, we apply a guard coating that resists tire marks, forklift traffic, and moisture penetration.
Why Rochester Facilities Choose Precision for Floor Care
Most commercial cleaning companies cannot name the person assigned to your building. Here is what Precision can verify.
Four hundred local employees means we can staff a floor project without pulling crew from your regular service schedule. If your facility needs a Saturday strip-and-wax before Monday opening, we can staff that without conflict.
Every crew member is background-checked before their first shift. Monthly skill assessments run across all 400 employees. Floor care is a skill-specific program: not every cleaner strips VCT, and not everyone handles marble. We assign crew with documented experience on each surface type.
We document every floor care visit. Digital reports and photo documentation go out after each job. You have a record of what was done, when, and by whom. If a section was missed or a finish coat did not cure correctly, you know before your next tenant walk-through.
BSCAI membership holds us to professional standards most local cleaning vendors do not track. No long-term contracts. We earn the next floor care cycle by doing this one right.
400 local employees | BSCAI Member | Est. 2019 | Monthly skill assessments | Weekly quality documentation with photo records
Serving Rochester Commercial Facilities
Rochester winters are hard on commercial floors. Lake-effect snowfall from November through March means salt, slush, and sand tracked in on every shoe and boot. Entry floors, corridors, and elevator lobbies take the worst of it. Tile and grout absorbs the brine. VCT finishes get scratched by tracked-in grit. Carpet at entryways can hold a full season of embedded soil by March.
We have been doing commercial floor care in Rochester since 2019. That means we know which building types have which floor problems, and which months generate the highest demand for restoration work.
Our commercial cleaning services in Rochester cover floor care as one component of a full facility program. Many clients use us for both janitorial and floor care so that one vendor manages the whole facility. For buildings coming out of construction or major renovation, we handle the post-construction cleaning first, then transition to a floor care maintenance program once the space is occupied.
See our Rochester reviews on our Google Business Profile. We have been part of commercial floor care in Rochester since 2019.
Commercial Floor Cleaning FAQs
How often should commercial floors be stripped and waxed?
For VCT in moderate-to-high-traffic areas, a full strip-and-wax cycle once or twice per year is typical. High-traffic corridors, entryways, and break rooms may need it more frequently. Between full cycles, spray buffing and top-coating extend the finish and reduce how often a full strip is needed. We assess the floor during a free walkthrough and recommend a schedule based on traffic volume and current finish condition.
Can you clean tile-and-grout without disrupting our business?
Yes. Tile-and-grout cleaning is typically done after hours or on weekends. The floor needs to dry before traffic resumes. For most commercial spaces, that means an overnight window is sufficient. We schedule around your operations and confirm the plan in writing before any crew is dispatched.
Do you handle multiple floor types in the same facility?
Yes. We are one of the few commercial cleaning vendors in Rochester that covers VCT, tile and grout, marble, carpet, and polished concrete under one contract. Coordinating multiple vendors for a single building adds scheduling complexity and creates accountability gaps when something goes wrong. One vendor, one point of contact, all surface types is how most of our facility clients prefer to run it.
Request Your Free Floor Care Estimate
Ready to schedule a walkthrough? We come out, assess each floor type in your facility, and deliver a written estimate. No commitment required.
Get in Touch
Phone #
Email:
Request a Free Quote
